TIPS & TRICKS - Upper rail maintenance
Inspecting and maintaining the upper rail of your moving floor trailer on a regular basis has numerous advantages. These handy tips and tricks explain how and why.
How does it work?
The sliding wheels on the moving bulk head of your moving floor trailer are equipped with a buffer stop to push the residual load from the upper rail. The buffer stops promote the smooth movement of the sliding wheels. The rail should be kept clean at all times to prevent the wheels from getting jammed. Otherwise, the moving bulk head can get stuck and, worst case scenario, the top edge can get damaged.
- Clean the upper rail after every transport, especially with dusty loads
Cleaning the upper rail after each unloading is a must when transporting dusty loads. The fine dustparticles that remain in the upper rail can end up in the bearings of the sliding wheels. In time, this can cause the sliding wheels to jam and ultimately damage the upper rail.
- Service your upper rail twice a week
Servicing the upper rail twice a week keeps your vehicle in top shape for longer. If possible, clean the rail using a compressed air gun (see photo). This not only removes residue ny load residue and dust particles, but you also avoid the costs of having to repair a jammed sliding wheels or damaged upper rail in the long term.
- Inspect your sliding wheels
Regularly checking the sliding wheels of the moving bulk head should be done on a regular basis. You can do this on sight, or you can easily check the condition of your sliding wheels by switching on the moving bulk head. Notice considerable resistance? Check your sliding wheels and replace them if necessary. You can download our extensive spare parts catalogue via this link, or contact your STAS dealer here.