The head of a illustrated character in 3D
An illustration of a trailer
An illustration of a planet with threes and a trailer on it

Liners ensure fast, efficient and safe bulk transport

Liners ensure fast, efficient and safe bulk transport

As a specialist in making walking floor and tipper trailers, we are also specialists when it comes to the characteristics of unloaded bulk materials during loading and unloading. From sand to gravel, from clay to demolition, from glass to scrap... all these raw materials have different properties and often lead to a separate approach during the unloading process.

Sticky bulk materials, incomplete unloading, steep angles of inclination or unevenness in the soil can be problematic and dangerous. Our drivers know the consequences of this: higher safety risks and loss of time.

To make the unloading process faster, more efficient and safer, even for bulk materials that are difficult to unload, STAS offers a wide range of liners. These liners can be used on all our tipping trailers except demolition and asphalt trailers and are an important aid to successful and efficient bulk transport.

Benefits of a liner

  • Liners are very wear-resistant, they withstand the bulk materials up to three times better than aluminium, while being three times lighter. This is clearly visible when disassembling the liner at the end of the (extended) life cycle of the tipping trailer. After disassembly, we don't see any damage to the aluminium body. It’s clear that liners reduce maintenance and repair costs and the tipping body will stay in nearly new condition, which strongly benefits the secondhand value.
  • A second characteristic is that the angle at which the bulk goods can be unloaded will be considerably smaller. This comes in handy in case of uneven or unstable road surface, as the center of gravity of the trailer can stay closer to the ground, which ensures a safer and more stable tipping angle. The height of the tipped trailer is also lower, reducing the chance of coming into contact with obstacles above the trailer.
  • The third feature of a liner is that it makes the inside of the tipper very smooth. This ensures that even with more difficult loads such as sand, gravel, limestone, grain and fertilizers, the trailer will be unloaded even faster and more efficiently. Making the unloading process faster results in a larger number of loads per day and therefore a higher profitability.

How is the liner applied?

The liner is applied on tippers at our Belgian dealer Atrac in Waregem.

As the liner shrinks and expands depending on the temperatures (the length of the liner can vary up to 1 cm per 10°C of temperature difference), it is mounted as a floating unit and fastened only at the front. On the sides, the liner is fixed by means of a Z-profile that is held against the aluminium tipping body.

When the front panel is then mounted and welded to the floor and side walls, the liner stays fixed inside the body.

In this pdf you will find an overview of all our liners and coatings for your tipper and we suggest for which application you can use them.

download the PDF file here

coatings_liners_STAS_EN.pdf
arrow-left settings