How to maintain your STAS moving floor trailer
The importance of periodic maintenance for vehicles cannot be overestimated. Although most maintenance and repairs are best carried out by your dealer, you can preserve the second-hand value of your vehicle by doing some checks and chores yourself.
The STAS experts give a few tips and explain which checks you can safely do yourself.
Need spare parts?
Check that the floorplank bolts are fitted securely
If you can feel any movement between the bolts in the planks and the planks themselves, it is strongly recommended to replace the bolts.
If present, check the seals between the floor planks
If there is visible deterioration or damage, it is recommended to replace the seals.
Check your hydraulic pistons
Working underneath the trailer, take a closer look at the three hydraulic pistons to check for wear and tear, or any visible damage.
Check the hydraulic oil
Ensure that there is enough hydraulic oil in the buffer tank (at least 150L). If necessary, top up the oil tank with the correct type of hydraulic oil (ISO VG 32).
Regular maintenance work
Clean the upper rail twice a week
The upper rail needs to stay clean to prevent the sliding wheels from blocking, thus blocking the moving bulkhead. The upper rail can easily be cleaned with a compressed air gun. When transporting dusty loads, it is recommended to do this every time after each unloading.
Click here to see how best to maintain your upper rail.
It is advisable to check the condition of the hydraulic oil every six months (hydraulic oil must have a light yellow, olive oil-like color, when the oil is deteriorating, the color turns darker or milky.) The oil filter should be replaced annually, and the oil itself every two years (or sooner, depending on use and condition). Visually inspect all the hydraulic connections once a week. Look for dirt, debris, and visible damage.
Cleaning your moving floor trailer
To keep your moving floor trailer in top condition, regularly cleaning it cannot be overrated. Not only do you avoid unnecessary wear and tear on the moving floor system and other parts, it’s also a good opportunity to go through other components and check for any problems.
It is recommended to use a pressure washer (60 -100 bar) with warm water (40 - 60°C) and a light detergent.
TIP: During the first four months, just use cold water after use. The paint needs several months to harden completely.
Check the video here:
Need help? Contact your nearest STAS dealer via the dealer finder: