A clean semi-trailer with a pressure washer on board
"Certain types of cargo can make your moving floor trailer very dirty. Sometimes it's necessary or even mandatory to clean up after unloading. Dirt, dust or odour can easily be removed with a pressure cleaner on board of your walking floor trailer."
Pressure washer on board
The pressure washer can be mounted as a specialised option on your STAS walking floor trailer. The hydraulic water pump delivers a force of 150 bar with an output of about 15 liters of water per minute.
This hydraulic system is equipped with a water hose of 20 meters so that the trailer can be cleaned anywhere. The system is located in the middle of the trailer so that you can clean everything in the front and back of the trailer as well as the inside of the trailer. The water tank has a capacity of 400 liters of water. This allows you to use the high-pressure cleaner intensively for 25 minutes.
The PVC water tank has been developed for your convenience. You can easily refill the water tank through the large opening. The hydraulic pump is thoughtfully installed in an aluminum toolbox.
How do you use the pressure washer?
- Make sure your trailer is on a location where you're allowed to clean it.
- Put on suitable clothing and safety shoes.
- Make sure there is enough water in the PVC water tank.
- Open the case and attach the water hose to the hydraulic system.
When the hose is attached, all you have to do is switch on the hydraulic water pump. You do this by changing the position of the three-way valve, which is mounted at the hight of the floor system. When this is done, you are ready to clean your walking floor trailer. Keep the spray nozzle at a sufficient distance from your target and start cleaning with a sideways movement at an angle of 45 degrees.
Do you need more information? Contact your nearest dealer here: